Detailed Product Description

Depending on unstable temperature,there are three type of HSCA to bo be supplied.

  TYPES
 USABLE

TEMPERATURE( oC)
 
HSCA _ I (SUMMER)
 25 -40
 
HSCA _ (SPRING & AUTUMN)
 10 -25
 
HSCA _ (WINTER)
 -5-10
 

                              HOLE DEPTH IS ONE METER

  HOLE DIAMETER(MM)
 30
 32
 34
 36
 38
 40
 42
 44
 46
 48
 50
 
CONSUMPTION(KG/M3)
 1.2
 1.3
 1.5
 1.7
 1.9
 2.1
 2.3
 2.5
 2.8
 3.0
 3.2
 

 
OPERATION OF HSCA AT JOB SITE

A.     Drilling:drill hoill hole with a air drill according to the requirements of design

B.      Stirring devices:10-20liter plastic or metal barreel mixer:allow a small amount of hsca to mix.Brhand ,but need using rubber glove. measuring water devices:measuring glass protector,rubber glove,protective glasses.

C.     Stirring:pour about 1.5litre clean water into a container and add one bag of HSCA slowly(pour water 30% of HSCA by weight) then mix well with a mixer until it becomes a slurry of good fludity.

D.     Filling:First of all, clean up the holes defore filling.HSCA slurry should be poured into hole within 10 minutes after mxing with water.For horizontal holes, a grouting pump and a plug for stopping up are required ,of fill the holes with thick paste of HSCA

E.      Cracking and cutting time;the cracks appear in 3-6 hours after filling ,depending on air temperature of rocks and concrete.The crcome wide and wider with time

ATTENTION

For safety,always use industaial gloves and ptotective eye wears when working .After filling do not look at any hole closely and ditectiy.

Lf skin is stained with some HSCA slnrry,immediately wash away is necessary,in order to prevent hurt from corroding by the slurry.

Make a choice among the types of HSCA products and use one which is suitable to working temperature.Keep dry in storage